Spread ADESIVER 164 with a toothed spatula uniformly on a clean foundation embodying possible dust present on it. Proceed with laying ensuring that the wood tiles are put together properly and gently hammered so as to make adhesive adhere well to the whole surface. In presence of dust creating and porous foundations apply one coat of PRYMER PIUB 77. Allow to cure for 24 hours before applying adhesive. Pre roughen surface prior to gluing to glassy surfaces such as ceramics.

This one component polyurethane adhesive especially recommended for gluing pre-finished parquet onto existing floors such as marble, ceramic, grit, etc. It dries in atmospheric dampness and in 24 hours becomes a water, temperature, and ageing resistant adhesive. Very good for gluing semi solids over UFH systems.

Coverage is approximately 1kg/m2 to 1.5kg/m2 and hardens in 36-48 hours.