After mixing the two components, spread ADVISER 501 EP with a toothed spatula uniformly on a clean foundation embodying possible dust present on it. Proceed with the laying ensuring that the wood tiles are put together properly and gently hammered so as to make the adhesive adhere well to the whole surface. In pourous or dust creating conditions apply one coat of PRYMER PUB 77. We do not recommend dipping the heads of tiles into the adhesive ADESIVER 501 EP while laying them. If need be, dip the heads of the tiles into a PARKETTKOLL adhesive which has a very strong wood to wood adhesion avoiding the typical 'skidding' of the tiles. If product is to be applied to a glassy surface, thoroughly roughen before application.

A two component epoxy-polyurethane adhesive, water and solvent free, apt to all knids of wood in any size without requiring the pre-laying of wood fillets or batons onto which parquet floor used to be nailed and glued.

This product is suited for use with solid floors and 20mm engineered boards with UFH, such as the Warrant range.

Coverage is approximately 1.2kg/m2 to 1.8kg/m2 and hardens in 36 - 48 hours.